HealthRider HRTL61706.0 User Manual download pdf (Page 9)

9

8. While a second person holds the console as-

sembly near the Pulse Bar (66), connect the

G

round Wire (107) on the Pulse Bar to the

ground wire from the console assembly.

C

onnect the wire from the console assembly to

the Upright Wire (75).

Make sure to connect

t

he connectors properly (see the inset draw-

ing). The connectors should slide together

easily and snap into place.

If the connectors

do not slide together easily and snap into place,

turn one connector and then try again. IF THE

CONNECTORS ARE NOT CONNECTED

PROPERLY, THE CONSOLE MAY BE DAM-

AGED WHEN THE POWER IS TURNED ON.

Lay the wires inside the bottom of the Pulse Bar

(66).

75

Console

Assembly

Wire

76

107

8

75

9. Set the console assembly on the Left and Right

Uprights (70, 76). Be careful not to pinch any

wires.

Attach the console assembly to the Pulse Bar

(66) with six 3/4" Screws (23). Start all six

Screws, before tighten them yet.

23

Console Assembly

23

23

76

70

9

Ground

Wire

66

66

10.Identify the Left Handrail Cover (68), which has

a LEFT sticker on it. Slide the Left Handrail

Cover onto the left Handrail (62) and up against

the console assembly. Tighten two Cover

Screws (52) into the Left Handrail Cover and the

Left Upright (70); be careful not to overtighten

the Cover Screws.

Attach the Right Handrail Cover (74) in the same

way.

Console

Assembly

52

68

70

74

52

10

62

62

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Comments to this Manuals

No comments