HealthRider HRTL61706.0 User Manual download pdf (Page 7)

2. Remove the packing insert from the location

shown in each side of the Base (81) (only one

ide is shown). If necessary, use a tool to help

pry out the insert. Then, discard the insert.

Slide a Front Endcap (80) onto the Base (81).

Partially tighten a Endcap Screw (79) into the

Front Endcap and the base.

Slide a Wheel Housing (86) onto the Base (81).

Attach the Wheel Housing with two 1" Tek

Screws (77) and a Base Pad (89) as shown.

Attach an additional Base Pad (89) to the Base

(81) with a 1" Tek Screw (77).

Insert

3. With the help of a second person, carefully tip

the treadmill onto its right side as shown.

Partially fold the Frame (26) so the treadmill is

more stable. Do not fully fold the Frame until

the treadmill is completely assembled.

Hold the Left Upright (70) against the Base (81).

Then, thread a 2 3/4" Upright Bolt (85) and a 1"

Upright Bolt (84) with 3/8" Star Washers (83) into

the Base (81) and the bottom of the Left Upright

(70). Do not tighten the Upright Bolts yet.

4. Slide a Front Endcap (80) onto the Base (81).

Partially tighten a Endcap Screw (79) into the

Front Endcap and the base.

Slide a Wheel Housing (86) onto the Base (81).

Attach the Wheel Housing with two 1" Tek

Screws (77) and a Base Pad (89) as shown.

Attach an additional Base Pad (89) to the Base

(81) with a 1" Tek Screws (77).

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

No comments

HealthRider HRTL61706.0 User Manual Page 7