HealthRider Treadmill H500i User Manual download pdf (Page 7)

4. With the help of a second person, carefully raise

the Uprights (84) to a vertical position.

Have the second person hold the Handrail (20)

near the Uprights (84). Insert the Upright Wire

Harness (77)

into the hole in the bottom of the

Handrail and out of the top as shown.

Next, set the Handrail (20) on the Uprights (84).

Do not let the Upright Wire Harness (77) fall

into the right Upright.

Attach the Handrail (20) with four Handrail Bolts

(64) and four Star Washers (8); start all four

Handrail Bolts and then firmly tighten them.

See steps 1 and 2. Fully tighten the two Front

Endcap Screws (14).

2. With the help of a second person, tip the tread-

mill onto its right side. Do not fully fold the

rame (58) yet.

nsert the other Extension Leg (89) into the base

of the Uprights (84). Hold an Extension Leg

Nut (67) in the bottom of the Extension Leg, and

thread a 2 1/4” Extension Leg Bolt (92) with a

Star Washer (8) into the top of the Extension

Leg. Next, thread a 2 1/2” Extension Leg Bolt

(65) with a Star Washer (8) into the bottom of the

Extension leg. Firmly tighten the Extension

Leg Bolts.

Slide the other Front Endcap (44) onto the base

of the Uprights (84). Partially tighten a Front

Endcap Screw (14) into the Front Endcap and

the base.

3. Attach two Base Pads (82) to the base of the

Uprights (84) with two 1" Tek Screws (83).

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

No comments

HealthRider Treadmill H500i User Manual Page 7