HealthRider HRSY23080 User Manual download pdf (Page 6)

4. Place the bracket on the lower end of the Main

Upright (1) over the indicated 3/8Ó x 2 3/4Ó Carriage

Bolts (45) in the Stabilizer (4). Hand tighten two 3/8Ó

Nylon Locknuts (50) onto the Bolts. Do not tighten

the Nylon Locknuts yet.

Insert two 3/8Ó x 3Ó Bolts (53) with two 3/8Ó Flat

Washers (55) through the indicated holes in the

Stabilizer (4) and the bracket on the Main Upright (1).

5. Press a 2Ó Square Inner Cap (28) into the end of the

Seat Base (6).

Insert two 3/8Ó x 2 3/4Ó Carriage Bolts (45) up through

the indicated holes in the Seat Base (6) and secure

the bolt heads with pieces of tape to prevent them

from falling out.

Insert a 3/8Ó x 3 1/2Ó Bolt (56) up through the welded

tube on the Seat Base (6) and secure the bolt head

with tape.

Place the Seat Base (6) on the floor with the holes in

the mounting bracket over the 3/8Ó x 3Ó Bolts (53)

going through the Stabilizer (4) and the bracket on

the Main Upright (1). Hand tighten two 3/8Ó Nylon

Locknuts (50) onto the Bolts. Do not tighten the

Nylon Locknuts yet.

2845

6. Place the Seat Frame (7) onto the 3/8Ó x 2 3/4Ó

Carriage Bolts (45) in the Seat Base (6). Hand tighten

two 3/8Ó Nylon Locknuts (50) onto the Bolts. Do not

tighten the Nylon Locknuts yet.

Locate two 3/8Ó x 3Ó Bolts (53) and slide a 3/8Ó Flat

Washer (55) onto each Bolt. Insert the 3/8Ó x 3Ó Bolts

through the indicated holes in the Main Upright (1)

and the bracket on the Seat Frame (7). Hand tighten

two 3/8Ó Nylon Locknuts (50) onto the Bolts. Do not

tighten the Nylon Locknuts yet.

Welded Tube

1 2 3 4 5 6 7 8 9 10 11 ... 28 29

No comments

HealthRider HRSY23080 User Manual Page 6