HealthRider HRSY23080 User Manual download pdf (Page 8)

12. Attach the upper ends of the Weight Guides (15) to

the welded bracket underneath the Weight Upright (2)

with two 3/8Ó x 1 3/4Ó Bolts (57) and two 3/8Ó Nylon

Locknuts (50). Tighten, but do not overtighten, the

Nylon Locknuts.

11. Slide a 3/8Ó Flat Washer (55) and a 5/8Ó x 1/2Ó

Bushing (85) onto a 3/8Ó x 2 3/4Ó Bolt (47). Line up

the hole in the indicated Weight Guide (15) with the

hole in the Weight Base (5). Slide the 3/8Ó x 2 3/4Ó

Bolt through the Weight Guide and the Weight Base.

Slide a 5/8Ó x 1/2Ó Bushing (85) onto the Bolt. Secure

the Bolt with a 3/8Ó Flat Washer (55) and a 3/8Ó Nylon

Locknut (50).

10. Attach two Bumpers (40) to the Weight Base (5) with

two #8 x 1Ó Screws (78). Insert the two Weight Guides

(15) through the indicated holes in the Weight Base

(5).

See the inset drawing. Press two Weight Inserts (77)

into the indicated holes in each Weight (21). Make

sure the large pin groove is pointed downward, as

shown. Slide all of the included Weights (21) onto

the two Weight Guides (15). Make sure the Weights

are oriented correctly. The adjustment holes must

be turned towards the center of the unit, as

shown.

For packaging purposes, the Top Weight (16) is

mounted in the upper threaded hole in the Weight

Tube (17). Unless you have bought the Weight

Expansion Set with five extra weight plates along with

your system, the Top Weight must be moved. Use the

Allen Wrench (100) to loosen the Button Head Screw

(52) and slide the Top Weight down to the lower of

the two threaded holes in the Weight Tube, as

shown. Lubricate the insides of the holes in the Top

Weight (16). Press the Weight Tube Bumper (18) into

the indicated end of the Weight Tube (17). Slide the

Weight Tube (17) with the Top Weight (16) onto the

Weight Guides (15). Attach the Allen Wrench Holder

(79) to the indicated location on the Seat Frame (7)

Locate the decal sheet with the stickers showing the

numbers 1 through 15. Place a sticker on each

Weight (21) and the Top Weight (16) right next to the

adjustment holes (see the inset drawing). The Top

Weight must have the number 1 on it.

100

Large Pin

Groove

Number

Decal

Adjustment

Holes on this

side

Place Stickers

on this side

Lubricate

Welded

Bracket

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 28 29

Comments to this Manuals

No comments

HealthRider HRSY23080 User Manual Page 8

Comments to this Manuals

Related products and manuals for Fitness, gymnastics & weight training HealthRider HRSY23080