HealthRider HRTL20001 User Manual download pdf (Page 6)

5. Move your right hand to the position shown at the right,

and hold the treadmill firmly. Using your left hand, lift the

storage latch. Raise the treadmill until the locking pin

snaps into the storage latch. Make sure that the locking

pin is inside the storage latch, and that the storage

latch is fully closed.

6. See drawing 6B. Attach a Base Pad (73) to the bottom of

the Stabilizer Plate (88) in the indicated location.

See drawing 6A. Stand behind the treadmill. Hold the Left

Crossbar Bracket (4) and the Right Crossbar Bracket (not

shown). Place one foot on the Base (75) in the indicated

location.Tip the treadmill back slightly. While the treadmill

is held in this position, a second person should slide the

Stabilizer Plate (88) onto the Base (see drawing 6C).

Keeping your foot on the Base, carefully tip the treadmill

up until it is resting on the Base. Make sure that the

Stabilizer Plate (88) stays on the Base.

See drawing 6C. Attach the Stabilizer Plate (88) to the

Base (75) with a Stabilizer Plate Bolt (105), two Washers

(97), and the Stabilizer Plate

Nut (95) as shown.

Before moving the treadmill, see HOW TO MOVE THE

TREADMILL on page 11.

7. Refer to assembly drawing 5 at the top of this page. Hold

the upper end of the treadmill with your right hand as

shown. Using your left hand, lift the storage latch. Pivot

the treadmill slightly until the locking pin is out of the stor-

age latch.

Hold the treadmill firmly with both hands, and lower the

treadmill to the floor. To decrease the possibility of in-

jury, bend your legs and keep your back straight.

8. Remove the paper backing from the Adhesive Clip (44).

Press the Adhesive Clip onto the Frame (84) in the indi-

cated location. Press the Allen Wrench (57) into the

Adhesive Clip. The use of the Allen Wrench is described

on page 13.

Make sure that all parts are tightened before you use the

treadmill. Note: Place a mat beneath the treadmill to pro-

tect the floor or carpet.

Storage Latch

Locking Pin

105

1 2 3 4 5 6 7 8 9 10 11 ... 18 19

No comments

HealthRider HRTL20001 User Manual Page 6