HealthRider HRTL17980 User Manual download pdf (Page 6)

ASSEMBLY

Assembly requires two people. Place the treadmill in a cleared area and remove all packing materials. Do not

ispose of the packing materials until the treadmill is assembled.

o tools are required.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a

small amount of lubricant may be transferred to the top of the walking belt, the sides of the walking platform, or

the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt or

on the sides of the walking platform, wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1. With the help of a second person, carefully raise the

Uprights (83) until the Wheels (107) are resting on the

floor as shown.

The stainless steel walking platform on your treadmill is

covered with a thin layer of plastic to protect it during

shipping. Before using the treadmill, peel the plastic off

the walking platform.

107

4. Make sure that all parts are tightened before you use the treadmill. Place a mat beneath the treadmill

to protect the floor or carpet. For your benefit, we recommend that you familiarize yourself with the

TROUBLE-SHOOTING AND MAINTENANCE section on page 18.

2. Next, make sure that the Lock Knob Sleeve (77) is fully

inserted into the left Upright (83).

Remove the Lock Knob (76) from the Lock Pin (81). Make

sure that the Lock Pin Collar (79) and the Spring (78) are

on the Lock Pin. Insert the Lock Pin into the left Upright

(83) and tighten the Lock Knob onto it.

Remove

plastic

3. Remove the paper backing from the Wrench Clip (102).

Press the Wrench Clip onto one of the Uprights (83) in

the indicated location. Press the Allen Wrench (101) into

the Wrench Clip. Note: The use of the Allen Wrench is

described on pages 18 and 19.

101

102

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

No comments

HealthRider HRTL17980 User Manual Page 6