HealthRider H500i User Manual download pdf (Page 6)

1. Make sure that the power cord is unplugged.

With the help of a second person, carefully tip

the treadmill onto its left side as shown. Partially

fold the Frame (58) so the treadmill is more sta-

ble. Do not fully fold the Frame until the

treadmill is completely assembled.

Insert an Extension Leg (89) into the base of the

Uprights (84). Hold an Extension Leg Nut (67) in

the bottom of the Extension Leg, and thread a

2.25" Extension Leg Bolt (92) with a Star

Washer (8) into the top of the Extension Leg.

Next, thread a 2.5" Extension Leg Bolt (65) with a

Star Washer (8) into the bottom of the Extension

Leg.

Firmly tighten the Extension Leg Bolts.

Slide a Front Endcap (44) onto the base of the

Upright (84). Finger tighten a Front Endcap

Screw (14) into the Front Endcap and the base.

Do not fully tighten the Screw yet.

ASSEMBLY

o hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires

two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing

materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-perfor-

mance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or

the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on

top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own Phillips screwdriver with a shaft at

least 6 in. (15 cm) long and wire cutters .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART LIST near the end of the manual. The number after the parentheses

shows the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preat-

tached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic

parts, do not use power tools for assembly.

Wheel Nut (13)–2

Wheel Nut (32)–2

1" Tek Screw (83)–2

2 1/2” Bolt (37)–2

Handrail Bolt (64)–4

Washer (38)–4

1/2” Bolt (45)–4

Star Washer

(106)–4

Extension Leg Bolt (96)–4

3 ( )

Star Washer

(84)–2

Star Washer (8)–8

Extension Leg Nut (67)–2

Screw (3)–11

Handrail Bolt (64)–4

Ground Screw

(33)–1

Front Endcap

Screw (14)–2

Extension Leg Bolt (96)–4

2.5" Extension Leg Bolt (65)–2

2.25" Extension Leg Bolt (92)–2

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments

HealthRider H500i User Manual Page 6

Comments to this Manuals

Related products and manuals for Treadmills HealthRider H500i