HealthRider H500i User Manual download pdf (Page 8)

7.

Set the console assembly on the Handrail (20).

Be careful to avoid pinching any of the

wires. Make sure that the ground wire (see

step 5) and the wire from the console assem

-

bly (see step 6) are in the indicated channel.

Hand tighten five Screws (3) into the Handrail

(20) and the console assembly. Do not put

Screws into the two indicated holes. Start all

five Screws, but do not tighten them yet.

6. While the second person continues to hold the

console assembly, locate the wire underneath

the console assembly.

Connect the wire from the console assembly to

the Wire Harness (77).

See the inset drawing.

The connectors should slide together easily

and snap into place. If they do not, turn one

connector and then try again. IF THE CONNEC-

TORS ARE NOT CONNECTED PROPERLY,

THE CONSOLE MAY BE DAMAGED WHEN

THE POWER IS TURNED ON. Insert the con-

nectors downward into the Handrail (20).

8

Console Assembly

3

3

No Screws

3

20

77

Console

Assembly

77

20

7

5. While a second person holds the console as-

sembly near the Handrail (20), attach the

g

round wire to the indicated hole in the Handrail

with a Ground Screw (33).

20

H

ole

Ground

Wire

Console

Assembly

33

5

6

Wire

Channel

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments