HealthRider HRSY23080 User Manual download pdf (Page 15)

36. Route the High Cable (73) through the slot in the leg

of the Seat Frame (7).

Attach the closed loop at the end of the High Cable

(73) to the Leg Lever (41) with a 3/8Ó x 2 3/4Ó Bolt

(47), two 3/8Ó Flat Washers (55) and a 3/8Ó Nylon

Locknut (50). Note: Do not overtighten the Nylon

Locknut.

Slot

37. Identify the Butterfly Cable (92). It is approximate-

ly 61Ó long and it has a loop on both ends.

Attach one end of the Butterfly Cable (92) to the Left

Adjustment Disc (26) with a 5/16Ó x 1Ó Bolt (87), a

3/8Ó Flat Washer (55), a 1/2Ó x 3/8Ó Bushing (83) and

a 5/16Ó Nylon Locknut (64). Note: The loop on the

Cable must wrap around the 1/2Ó x 3/8Ó Bushing.

For the sake of clarity, some parts have been

removed and the Adjustment Disc is shown

exploded.

38. Wrap the Butterfly Cable (92) around a 3 1/2Ó Pulley

(24) in the direction shown.

Attach the 3 1/2Ó Pulley (24) and a Cable Trap (25) to

the lower half of the Adjustable Pulley Frame (23)

with a 3/8Ó x 2Ó Bolt (54) and a 3/8Ó Nylon Locknut

(50). The Pulley must be attached to the middle of

the three adjustment holes.

Note: For the sake of clarity, some parts have

been removed from the drawing.

39. Attach the free end of the Butterfly Cable (92) to the

Right Adjustment Disc (27) with a 5/16Ó x 1Ó Bolt (87),

a 3/8Ó Flat Washer (55), a 1/2Ó x 3/8Ó Bushing (83)

and a 5/16Ó Nylon Locknut (64).

Note: The loop on the Cable must wrap around

the 1/2Ó x 3/8Ó Bushing.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 28 29

No comments

HealthRider HRSY23080 User Manual Page 15