HealthRider HRSY54370 User Manual download pdf (Page 10)

14. Cut the plastic zip tie (not shown) from the Cable

(35). Be careful not to damage the Cable.

Pull on the Cable (35) until you have enough slack

to route the Cable around the Pulley (41) attached

to the Right Butterfly Arm (15). Tighten the 3/8Ó x

2Ó Bolt (43). The Cable Trap (not shown) must

be oriented as shown in step 12.

Route the Cable (35) around the Pulley (41) on the

Left Butterfly Arm (14) in the same manner.

15. Pull the remaining slack in the Cable (35) as

shown. Wrap the Cable around a Pulley (41).

Attach the Pulley and a Cable Trap (67) to the Lift

Tube (11) with a 3/8Ó x 2Ó Bolt (43) and a 3/8Ó

Nylon Locknut (39).

16. Attach the Name Plate (7) to the Frame (2) with

two 3/4Ó Tap Screws (62).

17. Insert a 1/4Ó x 3 1/2Ó Carriage Bolt (59) through the

center hole in a Seat Plate (29). Attach the Seat

Plate to the Backrest (22) with two 1/4Ó x 3/4Ó Bolts

(56).

Insert the 1/4Ó x 3 1/2Ó Carriage Bolt (59) through

the indicated hole in the Frame (2). Tighten a 1/4Ó

Nylon Locknut (54) with a 1/4Ó Washer (55) onto

the Carriage Bolt.

Attach the other end of the Backrest (22) to the

Frame (2) with a 1/4Ó Washer (55) and a 1/4Ó x

3.1/2Ó Bolt (58).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

HealthRider HRSY54370 User Manual Page 10