HealthRider HRCR9155.0 User Manual download pdf (Page 6)

Hole

5. Push the Magnet Bracket (36) into the hole in the

Pedal Frame (4).

Lubricate a Frame Axle (13). Attach the Pedal

rame (4) to the Main Frame (1) with the Frame

Axle (13), two Rubber Washers (51), and two Axle

Fasteners (56).

6. Hold the Left Side Shield (21) against the left side

of the Seat Frame (2) in the indicated location.

Press three Fastener Bases (45) and three Fastener

Pins (57) into the Left Side Shield and the

Seat

Frame.

Attach the Right Side Shield (22, not shown) in the

same way.

7. Have another person hold the Long Link Arm (10)

and the Short Link Arm (11) and align the holes

near the ends of the Link Arms. Place two Plastic

Washers (49) between the holes in the Link Arms.

Attach the Seat Swing Arm (5) to the Long Link Arm

(10) and the Short Link Arm (11) with an M8 x

35mm Bolt (17) and an M8 Nylon Jam Nut (7).

8. Place the Seat (20) on the Frame (2). Slide the Seat

asher (38) onto the Seat Knob Bolt (43) and then

tighten the Seat Knob (37) onto it.

Slide the Weight Bracket (8) onto the Seat Frame (2)

so that it slants away from the HealthRider exerciser.

Align the holes in the Weight Bracket with the ones

in the end of the Frame. Insert the M8 x 120mm Bolt

(52) through the Weight Bracket and the Frame, and

secure it with an M8 Nylon Jam Nut (7).

Lubricate—13

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

HealthRider HRCR9155.0 User Manual Page 6