HealthRider H750i User Manual download pdf (Page 12)

HOW TO TURN ON THE POWER

Plug in the power cord (see page 10).

Locate the reset/off

ircuit breaker near

the power cord. Make

ure that the circuit

breaker is in the reset

position.

Next, stand on the foot rails of the treadmill. Find

the clip attached to the key (see the drawing on

page 11) and slide the clip onto the waistband of

your clothes. Then, insert the key into the console.

After a moment, the display will light. Important:

In an emergency situation, the key can be

pulled from the console, causing the walking

belt to slow to a stop. Test the clip by carefully

taking a few steps backward; if the key is not

pulled from the console, adjust the position of

the clip.

HOW TO USE THE MANUAL MODE

Insert the key into the console.

See HOW TO TURN ON THE POWER above.

Select the manual mode.

When the

key is in-

serted, the

manual

mode will be

selected. If a

program has

been selected, reselect the manual mode by

pressing any of the four Programs buttons repeat-

edly until a track appears in the display.

Start the walking belt.

To start the walking belt, press the Start button,

the Speed increase button, or one of the speed

buttons numbered 1 to 10.

If the Start button or the

Speed increase button

is pressed, the walking

belt will begin to move

at 1 mph. As you exer-

cise, change the speed

of the walking belt as desired by pressing the

Speed increase and decrease buttons. Each time

a button is pressed, the speed setting will change

y 0.1 mph; if a button is held down, the speed

setting will change in increments of 0.5 mph. Note:

fter the buttons are pressed, it may take a moment

for the walking belt to reach the selected speed set-

ting.

If one of the numbered speed buttons is pressed,

the walking belt will gradually change speed until it

reaches the selected speed setting.

To stop the walking belt, press the Stop button.

The time will begin to flash in the display. To

restart the walking belt, press the Start button, the

Speed increase button, or one of the numbered

speed buttons.

Change the incline of the treadmill as desired.

To change the incline of

the treadmill, press the

Incline increase and de-

crease buttons or one of

the incline buttons num-

bered 0 to 10. Each time

the Incline increase or decrease button is

pressed, the incline will change by 0.5%. If one of

the numbered incline buttons is pressed, the

treadmill will adjust to the selected incline setting.

Note: After the buttons are pressed, it may take a

moment for the treadmill to reach the selected in-

cline setting.

Follow your progress with the display.

Note: The display features several different

background colors. To select a background

color, press the Display Color button repeat-

edly.

When the

manual mode

is selected,

the display

will show a

track that

represents

1/4 mile. As you walk or run, indicators will appear

in succession around the track until the entire track

appears. The track will then disappear and the in-

dicators will again begin to appear in succession.

Track

Reset

Position

Track

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comments to this Manuals

No comments

HealthRider H750i User Manual Page 12

Comments to this Manuals

Related products and manuals for Treadmills HealthRider H750i