HealthRider HRTL77105 User Manual download pdf (Page 6)

ASSEMBLY

o hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench

and your own phillips screwdriver , wire cutters , and rubber mallet .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a

small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal

condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off

the lubricant with a soft cloth and a mild, non-abrasive cleaner.

To identify small parts during assembly, use the part identification drawings below.

Handrail Star

Washer (77)–2

Foot Screw (74)–2

1 1/4” Tek Screw (118)–2

Wheel Bolt (94)–2

Nut (20)–2

1” Tek Screw (100)–4

Console Bolt (78)–2

3/4” Tek Screw (65)–2

1. With the help of a second person, carefully raise the

Uprights (69) to the position shown.

Next, insert one of the Extension Legs (102) into the base

of the Uprights (69) as shown. Make sure that the

Extension Leg is turned so the Base Pad (99) is un-

derneath it. Note: It may be helpful to tip the Uprights for-

ward and use a rubber mallet to fully insert the Extension

Leg.

Insert the other Extension Leg (not shown) in the same

way.

102

1 2 3 4 5 6 7 8 9 10 11 ... 29 30

No comments

HealthRider HRTL77105 User Manual Page 6